Compound MAX MGSB creates conditions under which the friction surfaces in engine parts are covered with a metallic protective layer, which has a special structure. This layer partially restores the dimensions and geometry of worn parts, optimizes gaps in friction pairs, keeps more oil on the friction surfaces. This allows to:
facilitate gearshift. Optimization of gaps, retention of a denser oil layer on the surfaces of gearing provide the correct gearshift;
reduce noise and vibration levels. Optimization of gaps and restoration of the optimum spacing in bearings reduce noise and vibration during operation of the unit;
increase the car free run (in neutral gear). Retention of denser oil layer on the surface reduces the frictional losses and increase free run: movement the car in neutral gear.
protect the gearbox against wear. Protective layer on the friction surfaces and dense oil layer substantially reduce wear and increase the lifetime of the unit.
Protection of the unit against wear. The protective layer due to its durability and ability to retain a greater amount of oil significantly reduces wear especially at high loads and high temperatures which increases the lifetime of the unit.
Reducing friction losses. The denser oil layer in the toothings and bearings reduces power loss.
Improving the process of burnishing the unit parts, including condition after overhaul. Tribotechnical compound «Atomium MAX MGSB» accelerates the optimization of the gaps in conjugated friction parts.
Compound «Atomium MAX MGSB» is designed to protect against wear, extend the lifetime and restore characteristics of mechanic gear boxes, transfer boxes and reducers of trucks and special machinery during normal operation.
Tribotechnical compound «Atomium MAX MGSB»
Certified in accordance with the international quality standard ISO 9001-2008
Storage temperature: from -20 ᵒС to +70 ᵒС
Safety precautions and first aid:
It is not expected any health hazard when used under normal conditions.
In case of a contact with skin, wash out with warm water, and then wash again with soap.
In case of contact with eyes, wash out eyes with large amount of water.
In case of swallowing, consult a doctor.
Shelf life: 5 years. Manufacturing date is indicated on the can.
It is not recommended to apply the compound at existence of mechanical breakages of parts and assemblies.
Compound MAX MGSB is compatible with any type of transmission oils, does not change their properties and performance.
The sediment on the bottom of the can is the main working element of MAX MGSB - these are microparticles of minerals. It is crucially important to thoroughly stir the contents of the can before pouring it in the gearbox oil system (sediment color depending on the release batch can vary from light green to black).
Overdose of compound by 1.5-2 times is not dangerous for the gearbox and does not disturb its work.
Compound MAX MGSB does not affect the characteristics and status of parts made of composite materials and rubber.
Tribotechnical compound «MAX MGSB» is applied in one stage in accordance with the following procedure:
- Warm up the gear box up to operating temperature (regular operation).
- Stop the engine
- Shake the can thoroughly until natural sediments (active components) are totally dissolved.
- Fill in compound through the unit's regular oil filling neck at the rate 10 ml of the compound per 1 L of transmission oil.
- After applying the engine should run (it is recommended to drive the car) for no less than 20 - 25 min. in mode of regular operation.
After the procedure you can use the car as usual.